Fome-Cor®
Crescent provides a Fome-Cor® board for every application. The polystyrene core is bonded between high quality papers to create a lightweight, reliably rigid, ultra-smooth board. Fome-Cor® simplifies production, resists warping, and cuts cleanly while providing the quality and consistency you expect from Crescent framing products. The Fome-Cor® line features a wide range of types, sizes and thicknesses. Can be used for exhibits, POP displays, signage, photo mounting, screenprinting and framing.
Crescent provides a Fome-Cor® board for every application. The polystyrene core is bonded between high quality papers to create a lightweight, reliably rigid, ultra-smooth board. Fome-Cor® simplifies production, resists warping, and cuts cleanly while providing the quality and consistency you expect from Crescent framing products. The Fome-Cor® line features a wide range of types, sizes and thicknesses. Can be used for exhibits, POP displays, signage, photo mounting, screenprinting and framing.
 |
Acid-Free Fome-Cor® Acid-Free Fome-Core® is the ideal choice for conservation mounting applications. The face papers contain no lignin, ground wood or rosin sizing and are laminated to an inert, extruded polystyrene foam center. The pH value is 7.5-9.5 and the papers are buffered with a 3-5% alkaline reserve. |
||||
| 1/8" Thick (Thin) | 3/16” Thick (Standard Thickenss) | ||||
| 11804-3240C 11804-6040C |
32 x 40” 40 x 60” |
11104-3240C 11104-6040C |
32 x 40” 40 x 60” |
 |
|
 |
White Fome-Cor® White Fome-Cor® is perfect for all general applications. Laminated on both sides with clay-coated papers, providing a smooth surface and clean cuts. Ideal for all types of mounting as well as die cutting and embossing. |
|||||
| 3/16” (Standard Thickness) | 1/8” Thick (Thin) | 3/8” Thick (Very Thick) | ||||
| 11801-3240C 11801-6040C 11801-4896C |
32 x 40” 40 x 60” 48 x 96” |
11101-3020C 11101-2436C 11101-3040C 11101-3240C 11101-6040C 11101-4896C |
20 x 30” 24 x 36” 30 x 40” 32 x 40” 40 x 60” 48 x 96” |
11301-3040C 11301-6040C 11301-4896C |
30 x 40“ 40 x 60” 48 x 96” |
|
|
||||||
 |
Heat Activated Fome-Cor® Heat-Activated Fome-Cor® is a timesaving mount board that can be used in a mechanical or vacuum dry-mount press. Clay-coated liner paper is laminated to an extruded polystyrene center. The board is coated on one side with an adhesive that activates quickly at low temperatures (approximately 165º-170ºF). |
||||
| 3/16” Thick (Standard Thickness) | |||||
| 11105-2436C 11105-3240C 11105-6040C |
24 x 36” 32 x 40” 40 x 60” |
|
|||
 |
Black Centered Fome-Cor® Black-Centered Fome Cor® is ideal for mounting photographs, prints, presentations and other materials. The crisp black core is laminated between high-quality uncoated black papers. |
||||
| 3/16” Thick (Standard Thickness) | |||||
| 11188-3020C 11188-3240C 11188-6040C 11188-4896C |
20 x 30” 32 x 40” 40 x 60” 48 x 96” |
|
|||
 |
Gatorfoam® Polystyrene foam bonded between two layers of Luxcell®, a wood-fiber veneer laminate. White has white facers with white foam center. Black has black facers with black foam center. |
|||||
| White Gatorfoam® 1/8” Thick | White Gatorfoam® 3/16” Thick | |||||
| 80202-4896C |
48 x 96” | 80102-3240C 80102-6040C 80102-4896C |
32 x 40” 40 x 60” 48 x 96” |
|||
 |
Black Gatorfoam® 1/8” Thick | Black Gatorfoam® 3/16” Thick | ||||
| 90208-4896C | 48 x 96” | 90108-3240C 90108-6040C 90108-4896C |
32 x 40” 40 x 60” 48 x 96” |
 |
||
Fome-Core® and Gatorfoam® are registered trademarks of Alcan, Inc.